What are 2 applications for TCP? (2023)

What are 2 applications for TCP?

Some popular TCP/IP Applications include telnet, ssh and streaming media.

The Hypertext Transfer Protocol (HTTP) is the most commonly used TCP/IP application as it transfers web pages from a web server to a web browser.

The Routing Information Protocol (RIP) and the Router Discovery Protocol (RDISC) are two routing protocols for TCP/IP networks.

As mentioned earlier, TCP is the most common transport layer protocol. It is used by many application layer protocols like the HyperText Transfer Protocol (HTTP) and FTP.

Streaming media, real-time multiplayer games and voice over IP (VoIP) are examples of applications that often use UDP.

Application Layer--User Initiates Communication

The rlogin command uses the TCP transport layer protocol. TCP expects to receive data in the form of a stream of bytes containing the information in the command. Therefore, rlogin sends this data as a TCP stream. Not all application layer protocols use TCP, however.

Typically, applications that transfer data files will use TCP since the protocol's latency and performance issues are not that critical. UDP benefits applications that need to receive data quickly even if accuracy suffers. This is why real-time applications like audio and video streaming will often use UDP.

The application layer is the highest abstraction layer of the TCP/IP model that provides the interfaces and protocols needed by the users. It combines the functionalities of the session layer, the presentation layer and the application layer of the OSI model. It facilitates the user to use the services of the network.

Transmission Control Protocol (TCP) – a connection-oriented communications protocol that facilitates the exchange of messages between computing devices in a network. It is the most common protocol in networks that use the Internet Protocol (IP); together they are sometimes referred to as TCP/IP.

What are three common applications that use TCP choose three?

DHCP, SNMP, and TFTP use UDP. SMTP, FTP, and HTTP use TCP.

TCP is a transport-layer protocol that provides a reliable, full duplex, connection-oriented data transmission service. Most Internet applications use TCP. HTTP is an application-layer protocol that is used for distributed, collaborative, hypermedia information systems.

Answer: DNS and POP

The highest layer in the TCP/IP protocol is the application layer and the lowest layer is the link layer. The DNS and POP protocols are works on the application layer, therefore, these are the correct option.

While TCP/IP is the newer model, the Open Systems Interconnection (OSI) model is still referenced a lot to describe network layers. The OSI model was developed by the International Organization for Standardization.

Layer 2 is equivalent to the link layer (the lowest layer) in the TCP/IP network model. Layer2 is the network layer used to transfer data between adjacent network nodes in a wide area network or between nodes on the same local area network.

Transmission Control Protocol (TCP)

The following list shows examples of application layer protocols: Standard TCP/IP services such as the ftp , tftp , and telnet commands.

A few examples of application layer protocols are the Hypertext Transfer Protocol (HTTP), File Transfer Protocol (FTP), Post Office Protocol (POP), Simple Mail Transfer Protocol (SMTP), and Domain Name System (DNS). The presentation layer prepares data for the application layer.

4 The TCP/IP Protocol Stack is made up of four primary layers: the Application, Transport, Network, and Link layers (Diagram 1). Each layer within the TCP/IP protocol suite has a specific function. When the layers of the model are combined and transmitted, communication between systems can occur.

What is an example of a TCP IP service?

Standard TCP/IP services such as the ftp , tftp , and telnet commands. UNIX “r” commands, such as rlogin and rsh. Name services, such as NIS and the domain name system (DNS) Directory services (LDAP)

Key Concept: To summarize TCP's key characteristics, we can say that it is connection-oriented, bidirectional, multiply-connected, reliable, acknowledged, stream-oriented and flow-managed.

How does TCP work? TCP provides communication between an application program and the Internet Protocol (they are frequently written as TCP/IP.) An application does not need to required packet fragmentation on the transmission medium or other mechanisms for sending data in order to be sent via TCP.

Detailed Solution. The correct answer is IP.

Data needs to be broken up into small packets, which are then reassembled at the destination. The Transmission Control Protocol (TCP) is used to ensure reliable transport of those packets, with sequencing, acknowledgement, and retries. A faster but less reliable transport protocol is the User Datagram Protocol (UDP).